Lennox Air Duct Cleaning in Port Wentworth, GA | Everest Air Duct Cleaning Service Georgia
Independent our Air Duct Cleaning in Port Wentworth typically runs $280–$520 for a full system cleaning, with most jobs completed in a single visit. What sets our work apart is how we account for Port Wentworth’s industrial particulate load and extreme humidity — factors that destroy standard cleaning schedules and overwhelm factory filter specs. Call (877) 565-7296 for a free estimate; we serve the 31407 ZIP and surrounding neighborhoods same-day when possible.
Why Port Wentworth Residents Choose Us for Lennox Service
We’ve been cleaning Lennox duct systems in Georgia for twenty years, and Port Wentworth keeps us honest — learn more about our Lennox services. Scott Gray — owner and lead technician on every job — has crawled through enough attic ducts here to know that a Lennox CBA air handler in this climate is a different animal than the same unit in Macon or Augusta. The Savannah River floodplain doesn’t forgive shortcuts.
Our 433 verified reviews at 4.9 stars come from customers who checked our credentials before calling. They get Scott at the door, not a subcontractor with a weekend training certificate. We run Rotobrush contact-cleaning systems, Nikro HEPA vacuums, and Abatement Technologies air scrubbers — the same equipment used in commercial remediation jobs. When we find torn flex duct or a clogged drain pan, we repair and seal it on the spot. No second company needed.
We’re independent. Not factory-authorized, not franchise-dispatched. That means we use OEM Lennox parts when warranty or customer preference demands it, but we’ll also recommend quality aftermarket alternatives — MERV-rated filters, mastic sealants — when they’ll perform as well for less money. Two decades of crawlspace-level experience goes into every inspection.
Common Lennox Air Duct Cleaning Problems We Solve in Port Wentworth
- Duct-mounted iComfort thermostat sensors coated in port dust. Lennox’s iComfort sensors sit in the airflow stream, and in Port Wentworth’s industrial corridor they accumulate diesel particulates faster than the factory ever designed for. The thermostat starts reading ambient temperature wrong, short-cycling your compressor and spiking energy bills. We clean sensor housings and recalibrate during every full system cleaning.
- Signature Series SLO accessible duct joints failing in attic heat. Port Wentworth’s slab-on-grade homes route ductwork through unconditioned attics that hit 130°F+ July through September. The foil tape on SLO system joints degrades; we remove it and reseal with mastic rated for Georgia attic conditions.
- CBA air handler drain pans clogged with industrial grit and microbial slime. The extreme humidity here keeps condensate flowing year-round, and port-area particulates bind with that moisture into a paste that factory drain lines can’t clear. We flush pans and treat with antimicrobial — no water damage to your slab-on-grade foundation.
- Merit Series return duct boots tearing from debris weight. Those 2000s–2020s construction boom homes in Berwick Plantation and similar subdivisions? Original builders rarely cleaned ductwork post-construction. Drywall dust, insulation fibers, and mold growth accumulate until the flex duct boot separates from the collar. We clean, repair, and seal — full lifecycle.
- Dark port dust overwhelming standard filtration. That gritty, black layer our technicians pull from ducts near Jimmy DeLoach Parkway isn’t household dust. It’s diesel particulate and cargo residue that MERV 8 filters catch too late. We upgrade filtration and shorten cleaning intervals for these homes.
Lennox Service in Port Wentworth: What Local Conditions Mean for Your Equipment
Here’s the truth that doesn’t appear on Lennox’s national site: homes along the Jimmy DeLoach Parkway corridor, closest to the port and refinery operations, need duct cleaning every 6–8 months instead of the typical 1–2 year interval. We’ve measured it. The diesel particulate concentration in that corridor overwhelms standard Lennox filter systems — even the upgraded MERV 16 options — within a single cooling season. The particulate embeds in flex duct liner, combines with Savannah River humidity, and creates a substrate for mold that no suburban cleaning schedule addresses — which is why we also offer Savannah Lennox service with adjusted protocols.
We serviced a Lennox Signature Series SLO system on Berwick Boulevard in the Berwick Plantation subdivision — one of many Lennox repair in Pooler area jobs we’ve handled. The homeowner complained of poor airflow and musty smells. Our video inspection found return ducts caked with construction debris — drywall dust and fiberglass — from original build, plus a heavy layer of dark port dust. We performed a full system cleaning, sealed leaking flex duct joints with mastic, and flushed the air handler drain pan. Airflow improved 40% per the iComfort readout.
If your ducts haven’t been looked at in a decade, you don’t have an air quality problem — you have an air quality certainty.
Lennox Models & Products We Service in Port Wentworth
We clean, inspect, and repair across the full Lennox residential lineup: Signature Series (SLO), Elite Series (EL), Merit Series (ML), and CBA air handlers, including Lennox service in Hardeeville for nearby homeowners. Each has duct-system vulnerabilities we’ve documented in Port Wentworth conditions.
Scott Gray stocks OEM Lennox gaskets, drain pan components, and iComfort sensor modules for same-day resolution when warranty applies. For non-critical repairs — flex duct replacement, boot collars, standard filters — we carry quality aftermarket alternatives that match or exceed factory spec at lower cost. We’ll tell you which makes sense for your situation. No upsell, no mystery.
Lennox Service Pricing in Port Wentworth
| Service | Price Range |
|---|---|
| Lennox full system air duct cleaning (typical 3–4 ton residential) | $280 – $420 |
| Lennox full system cleaning + video inspection | $340 – $480 |
| Lennox full system cleaning + duct sealing (mastic) | $380 – $520 |
| iComfort thermostat sensor cleaning/recalibration | $85 – $125 (add-on) |
| CBA air handler drain pan flush and treatment | $120 – $180 (add-on) |
What drives cost: system tonnage, duct accessibility in your attic or crawlspace, contamination severity, and whether we find damage requiring repair. Every estimate starts with a free on-site inspection — no phone guesses. Homes in the Jimmy DeLoach Parkway corridor or with known construction debris typically land in the upper range due to extended cleaning time. Call (877) 565-7296 for your exact quote; estimates are free.
Serving Port Wentworth, GA — Our Local Coverage Area
We’re based in the Port Wentworth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Lennox Air Duct Cleaning in Port Wentworth
Port Wentworth’s industrial corridor exposes residential HVAC systems to diesel particulates, cargo dust, and refinery emissions that Savannah’s historic districts and inland suburbs simply don’t experience at comparable concentrations. These particulates are smaller and more abrasive than typical household dust, embedding deeper in Lennox flex duct liner and clogging iComfort sensors faster. We shorten recommended cleaning intervals for homes near the port and upgrade filtration accordingly. Call (877) 565-7296 to discuss your home’s specific exposure.
Yes, if the source is microbial growth in ductwork or the drain pan — which it usually is in Port Wentworth’s humidity. We clean the full duct system, flush and treat the CBA or EL air handler drain pan with antimicrobial, and verify drainage slope. If the smell persists after our work, we inspect for duct leaks drawing attic air or a cracked heat exchanger. Call (877) 565-7296 for a free diagnostic.
No. A 2020 system should not be distributing visible dust. In Port Wentworth’s newer subdivisions, this almost always traces to construction debris left in ducts during original build — drywall dust, insulation fragments, wood particulate — combined with port-area infiltration overwhelming the standard filter. Our video inspection identifies the source; full cleaning with HEPA extraction removes it. Call (877) 565-7296 for an exact assessment.
We clean and recalibrate duct-mounted iComfort temperature and humidity sensors as part of every full system cleaning. These sensors sit in the return airflow and accumulate Port Wentworth’s characteristic particulate layer, causing faulty readings and compressor short-cycling. We do not disassemble wall-mounted iComfort controls — those are electrical devices, not duct components — but we verify their readings against our independent measurements post-cleaning.
Most Berwick Plantation homes — 1,800–2,400 square feet, slab-on-grade with attic ductwork — take 3.5 to 5 hours for full system cleaning, video inspection, and basic seal checks. Homes with heavier contamination from port proximity or construction debris may extend to 6 hours. We schedule morning starts to finish same-day. Call (877) 565-7296 to book your slot.
Service Areas Near Port Wentworth
We run Lennox service calls throughout the greater Savannah region, including Savannah proper, Lennox repair in Garden City, Pooler, Bloomingdale, Rincon, and Richmond Hill. Scott Gray has worked ducts in all of them, though Port Wentworth’s industrial-humidity combination keeps us busiest here. Same-day availability varies by distance — call to confirm.
Book Your Lennox Service in Port Wentworth Today
Your Lennox system was built to perform. Port Wentworth’s air wasn’t. Let’s close that gap — and if you’re in the Rincon area, ask about Lennox service in Rincon as well. Call (877) 565-7296 for a free estimate — Scott Gray answers directly, and same-day appointments open most weekdays. Two decades of Georgia attic experience goes into every job we run.
Written by Scott Gray, Owner & Lead Technician at Everest Air Duct Cleaning Service Georgia, serving Port Wentworth since 2004.